Mer-Krete™
Fracture-Guard 5000
CRACK ISOLATION MOLD RESISTANT MEMBRANE
Fracture-Guard 5000 is a one step mold resistant membrane
composed of a modified latex elastomer that provides a monolithic
surface. Its thin section (approx. 20 mils) and excellent elongation
will inhibit the transferral of cracks from the substrate to the finished
surface. The membrane is installed in a semi-fluid state and can be
applied to any form or irregular shape (i.e. base flashings, parapets,
walls, etc.).
Mer-Krete™
Fracture-Guard 5000®
used with Maxxon Underlayemnts
A one step mold resistant
Crack Isolation membrane composed of a modified latex elastomer that
produces a monolithic surface. Its thin section (approx. 30 mils)
and excellent elongation will inhibit the transferral of cracks from
the substrate to the finished surface. The membrane is installed in
a semi-fluid state and can be applied to any form or irregular shape.
Mer-Krete™
HydroGuard One
ELASTOMERIC WATERPROOFING /
ANTIFRACTURE MEMBRANE
Hydro-Guard One is a thin, load bearing membrane composed
of a modified elastomeric copolymer. With excellent elongation properties
and high strength, HydroGuard One provides a 100% waterproof membrane
coating while limiting the transfer of substrate cracks to the finished
overlay. The membrane is installed in a liquid state and can be applied
to practically any form or irregular shape (i.e. base flashings, parapets,
walls, etc.).
Mer-Krete™
Hydro-Guard 2000
INTERIOR and EXTERIOR WATERPROOF and
CRACK ISOLATION MEMBRANE
Hydro-Guard 2000 is an asphalt modified latex membrane
reinforced with a synthetic fabric and is applied in a cold, semi-fluid
state. This thin, load bearing membrane is waterproof and will inhibit
the transferral of cracks from the substrate to the finished surface.
Mer-Krete™
B.F.P.
EXTERIOR WATERPROOF and CRACK ISOLATION MEMBRANE
Mer-Krete BFP is a cold, liquid applied membrane reinforced
with a synthetic fabric and protective covering. This thin, load bearing
membrane provides positive waterproofing while inhibiting the transferral
of cracks from the substrate to the finished surface. This membrane
is used in conjunction with tile, stone quarry and porcelain products.
Mer-Krete
747® Exterior
Dual Membrane System
Mer-Krete Systems Dual Membrane
System provides the specifier as well as the installer with the assurance
of a watertight system by using two separate waterproofing systems.
Mer-Krete™
300
WATERPROOF MEMBRANE SYSTEM
300 Waterproof membrane is a latex modified, fabric
reinforced system formulated and prepackaged at the factory. Formulated
with special latex compounds.
Mer-Krete™
310
WATERPROOF MEMBRANE SYSTEM
310 Waterproof membrane is a latex modified system
formulated and pre-packaged at the factory. It’s formulated
with special latex compounds.
